Sk8ology Deck Displays are the original floating gallery display hanger. Made from clear polycarbonite with stainless steel hardware and guaranteed for life.
Sk8ology's simple one screw/drywall anchor installation means your walls don't need multiple holes put in them to hang each board. Sk8ology Displays feature two types of installation options - locked or easy on/easy off depending on your individual situation.
Sk8ology Deck Displays are the exclusive display of professional skateboarding’s top pro's and companies. We have worked with nearly every professional skater, professional manufacturers, and thousands of retail skate shops, art galleries, and skateboard collectors around the globe. We are the official display of the Skateboarding Hall of Fame & are even used/recommended by The Smithsonian Institute for displaying skateboard decks.
Your order ships in one day via USPS so you get it lightning fast. 100% satisfaction or your money back. Guaranteed.
Treat your collectible skateboard decks like the artwork they are.
Worldwide patents pending.
*To hang a board horizontally you will need two Sk8ology Deck Displays.
Sk8ology Deck Displays are the original floating gallery display skateboard hanger. Here company founder, Mark "Schmiddy" Schmid shows us how to hang your collectable skateboard deck using the Sk8ology Deck Display and it's simple one screw/drywall anchor installation. STEP 1. Find a good location to hang your deck. Caution: If your wall is exposed to direct sunlight, the colors on your board may fade over time. Step 2. Measure the height where you want to hang your deck Eye level is best. Note: 57″ represents the average human eye-height and is regularly used as a standard in many galleries and museums. Now make a small mark using a pen or pencil. Step 3. If you are not lucky enough to have a wall stud to screw into you’ll have to drill a hole to fit the wall anchor Caution: Be sure you are not drilling through any electrical wires or plumbing. Step 4. Insert wall plastic wall anchor into hole and screw Deck Display onto the wall. NOTE: If your board doesn’t fit on to the Black T-Nuts you will need to use the included 7/32” Drill Bit to drill out the truck holes. DON’T WORRY! The 7/32" drill bit just barely opens the holes, literally less than a 1mm, absolutely negligible. Will not affect your decks value or appearance in anyway whatsoever! Step 5. There are two ways to hang your board on the Sk8ology Deck Display. Unlocked and locked. If you want your board to be “Locked” onto the wall, simply remove the black T-Nuts from the Deck Display and slide the board onto the metal rods using the adjustment nuts to increase/decrease the distance of your deck from the wall. Thread the Black T-nuts onto the shafts making sure they are in the locked position (the thick part of T-Nut facing out). If you want your board in the unlocked position, the wide part of the T-Nut will face in. Step 6. Enjoy! Shop Sk8ology Deck Displays: www.sk8ology.com Like us on Facebook: https://www.facebook.com/Sk8ologyFB Twitter: @sk8ology1 Instagram: Sk8ologyinc